Whether to install files to support the AppStream metadata specification.

Type: boolean

Default: true

Declared by:

Whether to enable support for NixOS containers. Defaults to true (at no cost if containers are not actually used).

Type: boolean

Default: true

Declared by:

List of systems to emulate. Will also configure Nix to support your new systems. Warning: the builder can execute all emulated systems within the same build, which introduces impurities in the case of cross compilation.

Type: list of string

Default: [ ]

Example:

[
  "wasm32-wasi"
  "x86_64-windows"
  "aarch64-linux"
]

Declared by:

Extra binary formats to register with the kernel. See https://www.kernel.org/doc/html/latest/admin-guide/binfmt-misc.html for more details.

Type: attribute set of (submodule)

Default: { }

Declared by:

Whether to open the interpreter file as soon as the registration is loaded, rather than waiting for a relevant file to be invoked.

See the description of the ‘F’ flag in the kernel docs for more details.

Type: boolean

Default: false

Declared by:

The interpreter to invoke to run the program.

Note that the actual registration will point to /run/binfmt/${name}, so the kernel interpreter length limit doesn’t apply.

Type: path

Declared by:

The magic number or extension to match on.

Type: string

Declared by:

A mask to be ANDed with the byte sequence of the file before matching

Type: null or string

Default: null

Declared by:

Whether to launch with the credentials and security token of the binary, not the interpreter (e.g. setuid bit).

See the description of the ‘C’ flag in the kernel docs for more details.

Implies/requires openBinary = true.

Type: boolean

Default: false

Declared by:

The byte offset of the magic number used for recognition.

Type: null or signed integer

Default: null

Declared by:

Whether to pass the binary to the interpreter as an open file descriptor, instead of a path.

Type: boolean

Default: false

Declared by:

Whether to pass the original argv[0] to the interpreter.

See the description of the ‘P’ flag in the kernel docs for more details;

Type: boolean

Default: false

Declared by:

Whether to recognize executables by magic number or extension.

Type: one of “magic”, “extension”

Default: "magic"

Declared by:

Whether to wrap the interpreter in a shell script.

This allows a shell command to be set as the interpreter.

Type: boolean

Default: true

Declared by:

List of names of kernel modules that should not be loaded automatically by the hardware probing code.

Type: list of string

Default: [ ]

Example:

[
  "cirrusfb"
  "i2c_piix4"
]

Declared by:

Whether to enable the validation of bootspec documents for each build. This will introduce Go in the build-time closure as we are relying on Cuelang for schema validation. Enable this option if you want to ascertain that your documents are correct. .

Type: boolean

Default: false

Example: true

Declared by:

User-defined data that extends the bootspec document.

To reduce incompatibility and prevent names from clashing between applications, it is highly recommended to use a unique namespace for your extensions.

Type: attribute set of anything

Default: { }

Declared by:

The kernel console loglevel. All Kernel Messages with a log level smaller than this setting will be printed to the console.

Type: signed integer

Default: 4

Declared by:

If enabled, NixOS will set up a kernel that will boot on crash, and leave the user in systemd rescue to be able to save the crashed kernel dump at /proc/vmcore. It also activates the NMI watchdog.

Type: boolean

Default: false

Declared by:

Parameters that will be passed to the kernel kexec-ed on crash.

Type: list of string

Default:

[
  "1"
  "boot.shell_on_fail"
]

Declared by:

The amount of memory reserved for the crashdump kernel. If you choose a too high value, dmesg will mention “crashkernel reservation failed”.

Type: string

Default: "128M"

Declared by:

Size limit for the /dev/shm tmpfs. Look at mount(8), tmpfs size option, for the accepted syntax.

Type: string

Default: "50%"

Example: "256m"

Declared by:

Size limit for the /dev tmpfs. Look at mount(8), tmpfs size option, for the accepted syntax.

Type: string

Default: "5%"

Example: "32m"

Declared by:

Any additional configuration to be appended to the generated modprobe.conf. This is typically used to specify module options. See modprobe.d(5) for details.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  options parport_pc io=0x378 irq=7 dma=1
''

Declared by:

A list of additional packages supplying kernel modules.

Type: list of package

Default: [ ]

Example: [ config.boot.kernelPackages.nvidia_x11 ]

Declared by:

Additional paths that get appended to the SYSTEMD_UNIT_PATH environment variable that can contain mutable unit files.

Type: list of string

Default: [ ]

Declared by:

Whether to enable grow the root partition on boot.

Type: boolean

Default: false

Example: true

Declared by:

Whether to try to load kernel modules for all detected hardware. Usually this does a good job of providing you with the modules you need, but sometimes it can crash the system or cause other nasty effects.

Type: boolean

Default: true

Declared by:

Whether to enable the NixOS initial RAM disk (initrd). This may be needed to perform some initialisation tasks (like mounting network/encrypted file systems) before continuing the boot process.

Type: boolean

Default: !config.boot.isContainer

Declared by:

The set of kernel modules in the initial ramdisk used during the boot process. This set must include all modules necessary for mounting the root device. That is, it should include modules for the physical device (e.g., SCSI drivers) and for the file system (e.g., ext3). The set specified here is automatically closed under the module dependency relation, i.e., all dependencies of the modules list here are included automatically. The modules listed here are available in the initrd, but are only loaded on demand (e.g., the ext3 module is loaded automatically when an ext3 filesystem is mounted, and modules for PCI devices are loaded when they match the PCI ID of a device in your system). To force a module to be loaded, include it in boot.initrd.kernelModules.

Type: list of string

Default: [ ]

Example:

[
  "sata_nv"
  "ext3"
]

Declared by:

Whether to run fsck on journaling filesystems such as ext3.

Type: boolean

Default: true

Declared by:

The compressor to use on the initrd image. May be any of:

The given program should read data from stdin and write it to stdout compressed.

Type: string or function that evaluates to a(n) string

Default: zstd if the kernel supports it (5.9+), gzip if not

Example: "xz"

Declared by:

Arguments to pass to the compressor for the initrd image, or null to use the compressor’s defaults.

Type: null or (list of string)

Default: null

Declared by:

Extra files to link and copy in to the initrd.

Type: attribute set of (submodule)

Default: { }

Declared by:

The object to make available inside the initrd.

Type: package

Declared by:

This option, if set, adds a collection of default kernel modules to boot.initrd.availableKernelModules and boot.initrd.kernelModules.

Type: boolean

Default: true

Declared by:

List of modules that are always loaded by the initrd.

Type: list of string

Default: [ ]

Declared by:

A list of cryptographic kernel modules needed to decrypt the root device(s). The default includes all common modules.

Type: list of string

Default:

[
  "aes"
  "aes_generic"
  "blowfish"
  "twofish"
  "serpent"
  "cbc"
  "xts"
  "lrw"
  "sha1"
  "sha256"
  "sha512"
  "af_alg"
  "algif_skcipher"
]

Declared by:

The encrypted disk that should be opened before the root filesystem is mounted. Both LVM-over-LUKS and LUKS-over-LVM setups are supported. The unencrypted devices can be accessed as /dev/mapper/«name».

Type: attribute set of (submodule)

Default: { }

Example:

{
  luksroot = {
    device = "/dev/disk/by-uuid/430e9eff-d852-4f68-aa3b-2fa3599ebe08";
  };
}

Declared by:

Whether to allow TRIM requests to the underlying device. This option has security implications; please read the LUKS documentation before activating it. This option is incompatible with authenticated encryption (dm-crypt stacked over dm-integrity).

Type: boolean

Default: false

Declared by:

Whether to bypass dm-crypt’s internal read and write workqueues. Enabling this should improve performance on SSDs; see here for more information. Needs Linux 5.9 or later.

Type: boolean

Default: false

Declared by:

Path of the underlying encrypted block device.

Type: string

Example: "/dev/disk/by-uuid/430e9eff-d852-4f68-aa3b-2fa3599ebe08"

Declared by:

Whether to fallback to interactive passphrase prompt if the keyfile cannot be found. This will prevent unattended boot should the keyfile go missing.

Type: boolean

Default: false

Declared by:

The FIDO2 credential ID.

Type: null or string

Default: null

Example: "f1d00200d8dc783f7fb1e10ace8da27f8312d72692abfca2f7e4960a73f48e82e1f7571f6ebfcee9fb434f9886ccc8fcc52a6614d8d2"

Declared by:

List of FIDO2 credential IDs.

Use this if you have multiple FIDO2 keys you want to use for the same luks device.

Type: list of string

Default: [ ]

Example:

[
  "f1d00200d8dc783f7fb1e10ace8da27f8312d72692abfca2f7e4960a73f48e82e1f7571f6ebfcee9fb434f9886ccc8fcc52a6614d8d2"
]

Declared by:

Time in seconds to wait for the FIDO2 key.

Type: signed integer

Default: 10

Declared by:

Defines whatever to use an empty string as a default salt.

Enable only when your device is PIN protected, such as Trezor.

Type: boolean

Default: false

Declared by:

The option to use this LUKS device with a GPG encrypted luks password by the GPG Smartcard. If null (the default), GPG-Smartcard will be disabled for this device.

Type: null or (submodule)

Default: null

Declared by:

Path to the GPG encrypted passphrase.

Type: path

Declared by:

Time in seconds to wait for the GPG Smartcard.

Type: signed integer

Default: 10

Declared by:

Path to the Public Key.

Type: path

Declared by:

The name of the file or block device that should be used as header for the encrypted device.

Type: null or string

Default: null

Example: "/root/header.img"

Declared by:

The name of the file (can be a raw device or a partition) that should be used as the decryption key for the encrypted device. If not specified, you will be prompted for a passphrase instead.

Type: null or string

Default: null

Example: "/dev/sdb1"

Declared by:

The offset of the key file. Use this in combination with keyFileSize to use part of a file as key file (often the case if a raw device or partition is used as a key file). If not specified, the key begins at the first byte of keyFile.

Type: null or signed integer

Default: null

Example: 4096

Declared by:

The size of the key file. Use this if only the beginning of the key file should be used as a key (often the case if a raw device or partition is used as key file). If not specified, the whole keyFile will be used decryption, instead of just the first keyFileSize bytes.

Type: null or signed integer

Default: null

Example: 4096

Declared by:

The amount of time in seconds for a keyFile to appear before timing out and trying passwords.

Type: null or signed integer

Default: null

Example: 5

Declared by:

Commands that should be run right after we have mounted our LUKS device.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  umount /tmp/persistent
''

Declared by:

Whether the luksOpen will be attempted before LVM scan or after it.

Type: boolean

Default: true

Declared by:

Commands that should be run right before we try to mount our LUKS device. This can be useful, if the keys needed to open the drive is on another partition.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  mkdir -p /tmp/persistent
  mount -t zfs rpool/safe/persistent /tmp/persistent
''

Declared by:

If keyFile fails then try an empty passphrase first before prompting for password.

Type: boolean

Default: false

Declared by:

The options to use for this LUKS device in YubiKey-PBA. If null (the default), YubiKey-PBA will be disabled for this device.

Type: null or (submodule)

Default: null

Declared by:

Time in seconds to wait for the YubiKey.

Type: signed integer

Default: 10

Declared by:

How much the iteration count for PBKDF2 is increased at each successful authentication.

Type: signed integer

Default: 0

Declared by:

Length of the LUKS slot key derived with PBKDF2 in byte.

Type: signed integer

Default: 64

Declared by:

Length of the new salt in byte (64 is the effective maximum).

Type: signed integer

Default: 16

Declared by:

Which slot on the YubiKey to challenge.

Type: signed integer

Default: 2

Declared by:

An unencrypted device that will temporarily be mounted in stage-1. Must contain the current salt to create the challenge for this LUKS device.

Type: path

Default: "/dev/sda1"

Declared by:

The filesystem of the unencrypted device.

Type: string

Default: "vfat"

Declared by:

Absolute path of the salt on the unencrypted device with that device’s root directory as “/”.

Type: string

Default: "/crypt-storage/default"

Declared by:

Whether to use a passphrase and a YubiKey (true), or only a YubiKey (false).

Type: boolean

Default: true

Declared by:

Enables support for authenticating with FIDO2 devices.

Type: boolean

Default: false

Declared by:

Enables support for authenticating with a GPG encrypted password.

Type: boolean

Default: false

Declared by:

Unless enabled, encryption keys can be easily recovered by an attacker with physical access to any machine with PCMCIA, ExpressCard, ThunderBolt or FireWire port. More information is available at http://en.wikipedia.org/wiki/DMA_attack.

This option blacklists FireWire drivers, but doesn’t remove them. You can manually load the drivers if you need to use a FireWire device, but don’t forget to unload them!

Type: boolean

Default: true

Declared by:

When opening a new LUKS device try reusing last successful passphrase.

Useful for mounting a number of devices that use the same passphrase without retyping it several times.

Such setup can be useful if you use cryptsetup luksSuspend. Different LUKS devices will still have different master keys even when using the same passphrase.

Type: boolean

Default: true

Declared by:

Enables support for authenticating with a YubiKey on LUKS devices. See the NixOS wiki for information on how to properly setup a LUKS device and a YubiKey to work with this feature.

Type: boolean

Default: false

Declared by:

Add network connectivity support to initrd. The network may be configured using the ip kernel parameter, as described in the kernel documentation. Otherwise, if networking.useDHCP is enabled, an IP address is acquired using DHCP.

You should add the module(s) required for your network card to boot.initrd.availableKernelModules. lspci -v | grep -iA8 'network\|ethernet' will tell you which.

Type: boolean

Default: false

Declared by:

Whether to clear the configuration of the interfaces that were set up in the initrd right before stage 2 takes over. Stage 2 will do the regular network configuration based on the NixOS networking options.

The default is false when systemd is enabled in initrd, because the systemd-networkd documentation suggests it.

Type: boolean

Default: "!config.boot.initrd.systemd.enable"

Declared by:

Starts an OpenVPN client during initrd boot. It can be used to e.g. remotely accessing the SSH service controlled by boot.initrd.network.ssh or other network services included. Service is killed when stage-1 boot is finished.

Type: boolean

Default: false

Declared by:

The configuration file for OpenVPN.

Type: path

Example: ./configuration.ovpn

Declared by:

Shell commands to be executed after stage 1 of the boot has initialised the network.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Start SSH service during initrd boot. It can be used to debug failing boot on a remote server, enter pasphrase for an encrypted partition etc. Service is killed when stage-1 boot is finished.

The sshd configuration is largely inherited from services.openssh.

Type: boolean

Default: false

Declared by:

Authorized keys for the root user on initrd.

Type: list of string

Default: config.users.users.root.openssh.authorizedKeys.keys

Declared by:

Verbatim contents of sshd_config.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Specify SSH host keys to import into the initrd.

To generate keys, use ssh-keygen(1) as root:

ssh-keygen -t rsa -N "" -f /etc/secrets/initrd/ssh_host_rsa_key
ssh-keygen -t ed25519 -N "" -f /etc/secrets/initrd/ssh_host_ed25519_key

Type: list of (string or path)

Default: [ ]

Example:

[
  "/etc/secrets/initrd/ssh_host_rsa_key"
  "/etc/secrets/initrd/ssh_host_ed25519_key"
]

Declared by:

Allow leaving config.boot.initrd.network.ssh empty, to deploy ssh host keys out of band.

Type: boolean

Default: false

Declared by:

Port on which SSH initrd service should listen.

Type: 16 bit unsigned integer; between 0 and 65535 (both inclusive)

Default: 22

Declared by:

Login shell of the remote user. Can be used to limit actions user can do.

Type: null or string

Default: "\"/bin/ash\""

Declared by:

Additional command-line arguments passed verbatim to udhcpc if boot.initrd.network.enable and networking.useDHCP are enabled.

Type: list of string

Default: [ ]

Declared by:

Shell commands to be executed immediately after stage 1 of the boot has loaded kernel modules and created device nodes in /dev.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Shell commands to be executed immediately after the stage 1 filesystems have been mounted.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Shell commands to be executed before udev is started to create device nodes.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Shell commands to be executed before the failure prompt is shown.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Shell commands to be executed immediately before LVM discovery.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Other initrd files to prepend to the final initrd we are building.

Type: list of string

Default: [ ]

Declared by:

Secrets to append to the initrd. The attribute name is the path the secret should have inside the initrd, the value is the path it should be copied from (or null for the same path inside and out).

Type: attribute set of (null or path)

Default: { }

Example:

{ "/etc/dropbear/dropbear_rsa_host_key" =
    ./secret-dropbear-key;
}

Declared by:

Contents of /etc/mdadm.conf in initrd.

Type: strings concatenated with “\n”

Default: ""

Declared by:

udev rules to include in the initrd only. They’ll be written into file 99-local.rules. Thus they are read and applied after the essential initrd rules.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1D:60:B9:6D:4F", KERNEL=="eth*", NAME="my_fast_network_card"
''

Declared by:

Names of supported filesystem types in the initial ramdisk.

Type: list of string

Default: [ ]

Example:

[
  "btrfs"
]

Declared by:

Whether to enable systemd in initrd. The unit options such as boot.initrd.systemd.services are the same as their stage 2 counterparts such as systemd.services, except that restartTriggers and reloadTriggers are not supported.

Note: This is experimental. Some of the boot.initrd options are not supported when this is enabled, and the options under boot.initrd.systemd are subject to change.

Type: boolean

Default: false

Example: true

Declared by:

The systemd package to use.

Type: package

Default: pkgs.systemdStage1

Declared by:

Packages providing systemd units and hooks.

Type: list of package

Default: [ ]

Example: [ pkgs.systemd-cryptsetup-generator ]

Declared by:

Additional units shipped with systemd that shall be enabled.

Type: list of string

Default: [ ]

Example:

[
  "debug-shell.service"
  "systemd-quotacheck.service"
]

Declared by:

Definition of systemd automount units. This is a list instead of an attrSet, because systemd mandates the names to be derived from the ‘where’ attribute.

Type: list of (submodule)

Default: [ ]

Declared by:

Set of files that have to be linked into the initrd

Type: attribute set of (submodule)

Default: { }

Example:

{
  "/etc/hostname".text = "mymachine";
}

Declared by:

Whether to enable copying of this file and symlinking it.

Type: boolean

Default: true

Example: true

Declared by:

Path of the source file.

Type: path

Declared by:

Path of the symlink.

Type: path

Default: "‹name›"

Declared by:

Text of the file.

Type: null or strings concatenated with “\n”

Default: null

Declared by:

Set to true for unauthenticated emergency access, and false for no emergency access.

Can also be set to a hashed super user password to allow authenticated access to the emergency mode.

Type: boolean or null or string, not containing newlines or colons

Default: false

Declared by:

Tools to add to /bin

Type: attribute set of path

Default: { }

Example:

{
  umount = ${pkgs.util-linux}/bin/umount;
}

Declared by:

Extra config options for systemd. See systemd-system.conf(5) man page for available options.

Type: strings concatenated with “\n”

Default: ""

Example: "DefaultLimitCORE=infinity"

Declared by:

Packages to include in /bin for the stage 1 emergency shell.

Type: list of package

Default: [ ]

Declared by:

Environment variables of PID 1. These variables are not passed to started units.

Type: attribute set of (null or string or path or package)

Default: { }

Example:

{
  SYSTEMD_LOG_LEVEL = "debug";
}

Declared by:

Definition of systemd mount units. This is a list instead of an attrSet, because systemd mandates the names to be derived from the ‘where’ attribute.

Type: list of (submodule)

Default: [ ]

Declared by:

Whether to enable networkd or not.

Type: boolean

Default: false

Declared by:

Definition of global systemd network config.

Type: submodule

Default: { }

Declared by:

Definition of systemd network links.

Type: attribute set of (submodule)

Default: { }

Declared by:

Definition of systemd network devices.

Type: attribute set of (submodule)

Default: { }

Declared by:

Definition of systemd networks.

Type: attribute set of (submodule)

Default: { }

Declared by:

Whether to enable the systemd-networkd-wait-online service.

systemd-networkd-wait-online can timeout and fail if there are no network interfaces available for it to manage. When systemd-networkd is enabled but a different service is responsible for managing the system’s internet connection (for example, NetworkManager or connman are used to manage WiFi connections), this service is unnecessary and can be disabled.

Type: boolean

Default: true

Example: false

Declared by:

Whether to consider the network online when any interface is online, as opposed to all of them. This is useful on portable machines with a wired and a wireless interface, for example.

Type: boolean

Default: false

Declared by:

Extra command-line arguments to pass to systemd-networkd-wait-online. These also affect per-interface systemd-network-wait-online@ services.

See systemd-networkd-wait-online.service(8) for all available options.

Type: list of string

Default: [ ]

Declared by:

Network interfaces to be ignored when deciding if the system is online.

Type: list of string

Default: [ ]

Example:

[
  "wg0"
]

Declared by:

Time to wait for the network to come online, in seconds. Set to 0 to disable.

Type: unsigned integer, meaning >=0

Default: 120

Example: 0

Declared by:

Definition of systemd path units.

Type: attribute set of (submodule)

Default: { }

Declared by:

Grow and add partitions to a partition table at boot time in the initrd. systemd-repart only works with GPT partition tables.

To run systemd-repart after the initrd, see options.systemd.repart.enable.

Type: boolean

Default: false

Example: true

Declared by:

The device to operate on.

If device == null, systemd-repart will operate on the device backing the root partition. So in order to dynamically create the root partition in the initrd you need to set a device.

Type: null or string

Default: null

Example: "/dev/vda"

Declared by:

Definition of systemd service units.

Type: attribute set of (submodule)

Default: { }

Declared by:

Definition of slice configurations.

Type: attribute set of (submodule)

Default: { }

Declared by:

Definition of systemd socket units.

Type: attribute set of (submodule)

Default: { }

Declared by:

Store paths to copy into the initrd as well.

Type: list of ((optionally newline-terminated) single-line string or package)

Default: [ ]

Declared by:

Whether to completely strip executables and libraries copied to the initramfs.

Setting this to false may save on the order of 30MiB on the machine building the system (by avoiding a binutils reference), at the cost of ~1MiB of initramfs size. This puts this option firmly in the territory of micro-optimisation.

Type: boolean

Default: true

Declared by:

Store paths specified in the storePaths option that should not be copied.

Type: list of (optionally newline-terminated) single-line string

Default: [ ]

Declared by:

A list of units to skip when generating system systemd configuration directory. This has priority over upstream units, boot.initrd.systemd.units, and boot.initrd.systemd.additionalUpstreamUnits. The main purpose of this is to prevent a upstream systemd unit from being added to the initrd with any modifications made to it by other NixOS modules.

Type: list of string

Default: [ ]

Example:

[
  "systemd-backlight@.service"
]

Declared by:

Definition of systemd target units.

Type: attribute set of (submodule)

Default: { }

Declared by:

Definition of systemd timer units.

Type: attribute set of (submodule)

Default: { }

Declared by:

Definition of systemd units.

Type: attribute set of (submodule)

Default: { }

Declared by:

Verbosity of the initrd. Please note that disabling verbosity removes only the mandatory messages generated by the NixOS scripts. For a completely silent boot, you might also want to set the two following configuration options:

Type: boolean

Default: true

Declared by:

Whether this NixOS machine is a lightweight container running in another NixOS system.

Type: boolean

Default: false

Declared by:

iSCSI portal to boot from.

Type: null or string

Default: null

Example: "192.168.1.1:3260"

Declared by:

Extra lines to append to /etc/iscsid.conf

Type: null or strings concatenated with “\n”

Default: null

Declared by:

Append an additional file’s contents to /etc/iscsid.conf. Use a non-store path and store passwords in this file. Note: the file specified here must be available in the initrd, see: boot.initrd.secrets.

Type: null or string

Default: null

Declared by:

Extra iscsi commands to run in the initrd.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Higher numbers elicits more logs.

Type: signed integer

Default: 1

Example: 8

Declared by:

Do not log into a specific target on the portal, but to all that we discover. This overrides setting target.

Type: boolean

Default: false

Declared by:

Name of the iSCSI initiator to boot from. Note, booting from iscsi requires networkd based networking.

Type: null or string

Default: null

Example: "iqn.2020-08.org.linux-iscsi.initiatorhost:example"

Declared by:

Name of the iSCSI target to boot from.

Type: null or string

Default: null

Example: "iqn.2020-08.org.linux-iscsi.targethost:example"

Declared by:

Whether to enable the Linux kernel. This is useful for systemd-like containers which do not require a kernel.

Type: boolean

Default: true

Example: true

Declared by:

Provides a custom seed for the RANDSTRUCT security option of the Linux kernel. Note that RANDSTRUCT is only enabled in NixOS hardened kernels. Using a custom seed requires building the kernel and dependent packages locally, since this customization happens at build time.

Type: string

Default: ""

Example: "my secret seed"

Declared by:

Runtime parameters of the Linux kernel, as set by sysctl(8). Note that sysctl parameters names must be enclosed in quotes (e.g. "vm.swappiness" instead of vm.swappiness). The value of each parameter may be a string, integer, boolean, or null (signifying the option will not appear at all).

Type: attribute set of (sysctl option value)

Default: { }

Example:

{ "net.ipv4.tcp_syncookies" = false; "vm.swappiness" = 60; }

Declared by:

The maximum socket receive buffer size. In case of conflicting values, the highest will be used.

Type: null or unsigned integer, meaning >=0

Default: null

Declared by:

The set of kernel modules to be loaded in the second stage of the boot process. Note that modules that are needed to mount the root file system should be added to boot.initrd.availableKernelModules or boot.initrd.kernelModules.

Type: list of string

Default: [ ]

Declared by:

This option allows you to override the Linux kernel used by NixOS. Since things like external kernel module packages are tied to the kernel you’re using, it also overrides those. This option is a function that takes Nixpkgs as an argument (as a convenience), and returns an attribute set containing at the very least an attribute kernel. Additional attributes may be needed depending on your configuration. For instance, if you use the NVIDIA X driver, then it also needs to contain an attribute nvidia_x11.

Please note that we strictly support kernel versions that are maintained by the Linux developers only. More information on the availability of kernel versions is documented in the Linux section of the manual.

Type: raw value

Default: pkgs.linuxPackages

Example: pkgs.linuxKernel.packages.linux_5_10

Declared by:

Parameters added to the kernel command line.

Type: list of string, with spaces inside double quotes

Default: [ ]

Declared by:

A list of additional patches to apply to the kernel.

Every item should be an attribute set with the following attributes:

{
  name = "foo";                 # descriptive name, required

  patch = ./foo.patch;          # path or derivation that contains the patch source
                                # (required, but can be null if only config changes
                                # are needed)

  extraStructuredConfig = {     # attrset of extra configuration parameters
    FOO = lib.kernel.yes;       # (without the CONFIG_ prefix, optional)
  };                            # values should generally be lib.kernel.yes,
                                # lib.kernel.no or lib.kernel.module

  features = {                  # attrset of extra "features" the kernel is considered to have
    foo = true;                 # (may be checked by other NixOS modules, optional)
  };

  extraConfig = "CONFIG_FOO y"; # extra configuration options in string form
                                # (deprecated, use extraStructuredConfig instead, optional)
}

There’s a small set of existing kernel patches in Nixpkgs, available as pkgs.kernelPatches, that follow this format and can be used directly.

Type: list of (attribute set)

Default: [ ]

Example:

[
  {
    name = "foo";
    patch = ./foo.patch;
    extraStructuredConfig.FOO = lib.kernel.yes;
    features.foo = true;
  }
]

Declared by:

Whether the installation process is allowed to modify EFI boot variables.

Type: boolean

Default: false

Declared by:

Where the EFI System Partition is mounted.

Type: string

Default: "/boot"

Declared by:

Whether to enable use an external tool to install your bootloader.

Type: boolean

Default: false

Example: true

Declared by:

The full path to a program of your choosing which performs the bootloader installation process.

The program will be called with an argument pointing to the output of the system’s toplevel.

Type: path

Declared by:

Whether to create symlinks to the system generations under /boot. When enabled, /boot/default/kernel, /boot/default/initrd, etc., are updated to point to the current generation’s kernel image, initial RAM disk, and other bootstrap files.

This optional is not necessary with boot loaders such as GNU GRUB for which the menu is updated to point to the latest bootstrap files. However, it is needed for U-Boot on platforms where the boot command line is stored in flash memory rather than in a menu file.

Type: boolean

Default: false

Declared by:

Whether copy the necessary boot files into /boot, so /nix/store is not needed by the boot loader.

Type: boolean

Default: false

Declared by:

Whether to generate an extlinux-compatible configuration file under /boot/extlinux.conf. For instance, U-Boot’s generic distro boot support uses this file format.

See U-boot’s documentation for more information.

Type: boolean

Default: false

Declared by:

Maximum number of configurations in the boot menu.

Type: signed integer

Default: 20

Example: 10

Declared by:

Contains the builder command used to populate an image, honoring all options except the -c <path-to-default-configuration> argument. Useful to have for sdImage.populateRootCommands

Type: string (read only)

Declared by:

Whether to generate Device Tree-related directives in the extlinux configuration.

When enabled, the bootloader will attempt to load the device tree binaries from the generation’s kernel.

Note that this affects all generations, regardless of the setting value used in their configurations.

Type: boolean

Default: true

Declared by:

Whether to enable the GNU GRUB boot loader.

Type: boolean

Default: !config.boot.isContainer

Declared by:

Enable support for encrypted partitions. GRUB should automatically unlock the correct encrypted partition and look for filesystems.

Type: boolean

Default: false

Declared by:

Background color to be used for GRUB to fill the areas the image isn’t filling.

Type: null or string

Default: null

Example: "#7EBAE4"

Declared by:

Maximum of configurations in boot menu. GRUB has problems when there are too many entries.

Type: signed integer

Default: 100

Example: 120

Declared by:

GRUB entry name instead of default.

Type: string

Default: ""

Example: "Stable 2.6.21"

Declared by:

Whether the GRUB menu builder should copy kernels and initial ramdisks to /boot. This is done automatically if /boot is on a different partition than /.

Type: boolean

Default: false

Declared by:

Index of the default menu item to be booted. Can also be set to “saved”, which will make GRUB select the menu item that was used at the last boot.

Type: signed integer or string

Default: "0"

Declared by:

The device on which the GRUB boot loader will be installed. The special value nodev means that a GRUB boot menu will be generated, but GRUB itself will not actually be installed. To install GRUB on multiple devices, use boot.loader.grub.devices.

Type: string

Default: ""

Example: "/dev/disk/by-id/wwn-0x500001234567890a"

Declared by:

The devices on which the boot loader, GRUB, will be installed. Can be used instead of device to install GRUB onto multiple devices.

Type: list of string

Default: [ ]

Example:

[
  "/dev/disk/by-id/wwn-0x500001234567890a"
]

Declared by:

Whether to invoke grub-install with --removable.

Unless you turn this on, GRUB will install itself somewhere in boot.loader.efi.efiSysMountPoint (exactly where depends on other config variables). If you’ve set boot.loader.efi.canTouchEfiVariables AND you are currently booted in UEFI mode, then GRUB will use efibootmgr to modify the boot order in the EFI variables of your firmware to include this location. If you are not booted in UEFI mode at the time GRUB is being installed, the NVRAM will not be modified, and your system will not find GRUB at boot time. However, GRUB will still return success so you may miss the warning that gets printed (“efibootmgr: EFI variables are not supported on this system.”).

If you turn this feature on, GRUB will install itself in a special location within efiSysMountPoint (namely EFI/boot/boot$arch.efi) which the firmwares are hardcoded to try first, regardless of NVRAM EFI variables.

To summarize, turn this on if:

Type: boolean

Default: false

Declared by:

Whether GRUB should be built with EFI support. EFI support is only available for GRUB v2. This option is ignored for GRUB v1.

Type: boolean

Default: false

Declared by:

Options applied to the primary NixOS menu entry.

Type: null or string

Default: "--class nixos --unrestricted"

Declared by:

Additional GRUB commands inserted in the configuration file just before the menu entries.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
  terminal_input --append serial
  terminal_output --append serial
''

Declared by:

Any additional entries you want added to the GRUB boot menu.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  # GRUB 1 example (not GRUB 2 compatible)
  title Windows
    chainloader (hd0,1)+1
  
  # GRUB 2 example
  menuentry "Windows 7" {
    chainloader (hd0,4)+1
  }
  
  # GRUB 2 with UEFI example, chainloading another distro
  menuentry "Fedora" {
    set root=(hd1,1)
    chainloader /efi/fedora/grubx64.efi
  }
''

Declared by:

Whether extraEntries are included before the default option.

Type: boolean

Default: false

Declared by:

A set of files to be copied to /boot. Each attribute name denotes the destination file name in /boot, while the corresponding attribute value specifies the source file.

Type: attribute set of path

Default: { }

Example:

{ "memtest.bin" = "${pkgs.memtest86plus}/memtest.bin"; }

Declared by:

Additional arguments passed to grub-install.

A use case for this is to build specific GRUB2 modules directly into the GRUB2 kernel image, so that they are available and activated even in the grub rescue shell.

They are also necessary when the BIOS/UEFI is bugged and cannot correctly read large disks (e.g. above 2 TB), so GRUB2’s own nativedisk and related modules can be used to use its own disk drivers. The example shows one such case. This is also useful for booting from USB. See the GRUB source code for which disk modules are available.

The list elements are passed directly as argv arguments to the grub-install program, in order.

Type: list of string

Default: [ ]

Example:

[
  "--modules=nativedisk ahci pata part_gpt part_msdos diskfilter mdraid1x lvm ext2"
]

Declared by:

Additional shell commands inserted in the bootloader installer script after generating menu entries.

Type: strings concatenated with “\n”

Default: ""

Example:

''
  # the example below generates detached signatures that GRUB can verify
  # https://www.gnu.org/software/grub/manual/grub/grub.html#Using-digital-signatures
  ''${pkgs.findutils}/bin/find /boot -not -path "/boot/efi/*" -type f -name '*.sig' -delete
  old_gpg_home=$GNUPGHOME
  export GNUPGHOME="$(mktemp -d)"
  ''${pkgs.gnupg}/bin/gpg --import ''${priv_key} > /dev/null 2>&1
  ''${pkgs.findutils}/bin/find /boot -not -path "/boot/efi/*" -type f -exec ''${pkgs.gnupg}/bin/gpg --detach-sign "{}" \; > /dev/null 2>&1
  rm -rf $GNUPGHOME
  export GNUPGHOME=$old_gpg_home
''

Declared by:

Additional GRUB commands inserted in the configuration file at the start of each NixOS menu entry.

Type: strings concatenated with “\n”

Default: ""

Example: "root (hd0)"

Declared by:

Additional bash commands to be run at the script that prepares the GRUB menu entries.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Path to a TrueType, OpenType, or pf2 font to be used by Grub.

Type: null or path

Default: "${pkgs.grub2}/share/grub/unicode.pf2"

Declared by:

Font size for the grub menu. Ignored unless font is set to a ttf or otf font.

Type: null or signed integer

Default: null

Example: 16

Declared by:

Whether to try and forcibly install GRUB even if problems are detected. It is not recommended to enable this unless you know what you are doing.

Type: boolean

Default: false

Declared by:

Whether to force the use of a ia32 boot loader on x64 systems. Required to install and run NixOS on 64bit x86 systems with 32bit (U)EFI.

Type: boolean

Default: false

Declared by:

Determines how GRUB will identify devices when generating the configuration file. A value of uuid / label signifies that grub will always resolve the uuid or label of the device before using it in the configuration. A value of provided means that GRUB will use the device name as show in df or mount. Note, zfs zpools / datasets are ignored and will always be mounted using their labels.

Type: one of “uuid”, “label”, “provided”

Default: "uuid"

Declared by:

The gfxmode to pass to GRUB when loading a graphical boot interface under BIOS.

Type: string

Default: "1024x768"

Example: "auto"

Declared by:

The gfxmode to pass to GRUB when loading a graphical boot interface under EFI.

Type: string

Default: "auto"

Example: "1024x768"

Declared by:

The gfxpayload to pass to GRUB when loading a graphical boot interface under BIOS.

Type: string

Default: "text"

Example: "keep"

Declared by:

The gfxpayload to pass to GRUB when loading a graphical boot interface under EFI.

Type: string

Default: "keep"

Example: "text"

Declared by:

Set of iPXE scripts available for booting from the GRUB boot menu.

Type: attribute set of (path or string)

Default: { }

Example:

{ demo = ''
    #!ipxe
    dhcp
    chain http://boot.ipxe.org/demo/boot.php
  '';
}

Declared by:

Make Memtest86+ (or MemTest86 if EFI support is enabled), a memory testing program, available from the GRUB boot menu. MemTest86 is an unfree program, so this requires allowUnfree to be set to true.

Type: boolean

Default: false

Declared by:

Parameters added to the Memtest86+ command line. As of memtest86+ 5.01 the following list of (apparently undocumented) parameters are accepted:

This list of command line options was obtained by reading the Memtest86+ source code.

Type: list of string

Default: [ ]

Example:

[
  "console=ttyS0,115200"
]

Declared by:

Mirror the boot configuration to multiple partitions and install grub to the respective devices corresponding to those partitions.

Type: list of (submodule)

Default: [ ]

Example:

[
  {
    devices = [
      "/dev/disk/by-id/wwn-0x500001234567890a"
    ];
    path = "/boot1";
  }
  {
    devices = [
      "/dev/disk/by-id/wwn-0x500009876543210a"
    ];
    path = "/boot2";
  }
]

Declared by:

The path to the devices which will have the GRUB MBR written. Note these are typically device paths and not paths to partitions.

Type: list of string

Default: [ ]

Example:

[
  "/dev/disk/by-id/wwn-0x500001234567890a"
  "/dev/disk/by-id/wwn-0x500009876543210a"
]

Declared by:

The id of the bootloader to store in efi nvram. The default is to name it NixOS and append the path or efiSysMountPoint. This is only used if boot.loader.efi.canTouchEfiVariables is true.

Type: null or string

Default: null

Example: "NixOS-fsid"

Declared by:

The path to the efi system mount point. Usually this is the same partition as the above path and can be left as null.

Type: null or string

Default: null

Example: "/boot1/efi"

Declared by:

The path to the boot directory where GRUB will be written. Generally this boot path should double as an EFI path.

Type: string

Example: "/boot1"

Declared by:

Background image used for GRUB. Set to null to run GRUB in text mode.

Type: null or path

Example: ./my-background.png

Declared by:

Whether to stretch the image or show the image in the top-left corner unstretched.

Type: one of “normal”, “stretch”

Default: "stretch"

Declared by:

Path to the Nix store when looking for kernels at boot. Only makes sense when copyKernels is false.

Type: string

Default: "/nix/store"

Declared by:

Options applied to the secondary NixOS submenu entry.

Type: null or string

Default: "--class nixos"

Declared by:

Grub theme to be used.

Type: null or path

Default: null

Example: pkgs.nixos-grub2-theme

Declared by:

If set to true, append entries for other OSs detected by os-prober.

Type: boolean

Default: false

Declared by:

User accounts for GRUB. When specified, the GRUB command line and all boot options except the default are password-protected. All passwords and hashes provided will be stored in /boot/grub/grub.cfg, and will be visible to any local user who can read this file. Additionally, any passwords and hashes provided directly in a Nix configuration (as opposed to external files) will be copied into the Nix store, and will be visible to all local users.

Type: attribute set of (submodule)

Default: { }

Example:

{
  root = {
    hashedPasswordFile = "/path/to/file";
  };
}

Declared by:

Specifies the password hash for the account, generated with grub-mkpasswd-pbkdf2. This hash will be copied to the Nix store, and will be visible to all local users.

Type: null or string

Default: null

Example: "grub.pbkdf2.sha512.10000.674DFFDEF76E13EA...2CC972B102CF4355"

Declared by:

Specifies the path to a file containing the password hash for the account, generated with grub-mkpasswd-pbkdf2. This hash will be stored in /boot/grub/grub.cfg, and will be visible to any local user who can read this file.

Type: null or string

Default: null

Example: "/path/to/file"

Declared by:

Specifies the clear text password for the account. This password will be copied to the Nix store, and will be visible to all local users.

Type: null or string

Default: null

Example: "Pa$$w0rd!"

Declared by:

Specifies the path to a file containing the clear text password for the account. This password will be stored in /boot/grub/grub.cfg, and will be visible to any local user who can read this file.

Type: null or string

Default: null

Example: "/path/to/file"

Declared by:

Whether GRUB should be built against libzfs. ZFS support is only available for GRUB v2. This option is ignored for GRUB v1.

Type: boolean

Default: false

Declared by:

Some systems require a /sbin/init script which is started. Or having it makes starting NixOS easier. This applies to some kind of hosting services and user mode linux.

Additionally this script will create /boot/init-other-configurations-contents.txt containing contents of remaining configurations. You can copy paste them into /sbin/init manually running a rescue system or such.

Type: boolean

Default: false

Declared by:

Whether to create files with the system generations in /boot. /boot/old will hold files from old generations.

Type: boolean

Default: false

Declared by:

Extra options that will be appended to /boot/config.txt file. For possible values, see: https://www.raspberrypi.com/documentation/computers/config_txt.html

Type: null or strings concatenated with “\n”

Default: null

Declared by:

Enable using uboot as bootmanager for the raspberry pi.

Type: boolean

Default: false

Declared by:

Maximum number of configurations in the boot menu.

Type: signed integer

Default: 20

Example: 10

Declared by:

Type: one of 0, 1, 2, 3, 4

Default: 2

Declared by:

Whether to enable the systemd-boot (formerly gummiboot) EFI boot manager

Type: boolean

Default: false

Declared by:

Maximum number of latest generations in the boot menu. Useful to prevent boot partition running out of disk space.

null means no limit i.e. all generations that were not garbage collected yet.

Type: null or signed integer

Default: null

Example: 120

Declared by:

The resolution of the console. The following values are valid:

Type: one of “0”, “1”, “2”, “auto”, “max”, “keep”

Default: "keep"

Declared by:

Whether to allow editing the kernel command-line before boot. It is recommended to set this to false, as it allows gaining root access by passing init=/bin/sh as a kernel parameter. However, it is enabled by default for backwards compatibility.

Type: boolean

Default: true

Declared by:

Any additional entries you want added to the systemd-boot menu. These entries will be copied to /boot/loader/entries. Each attribute name denotes the destination file name, and the corresponding attribute value is the contents of the entry.

systemd-boot orders the menu entries by the config file names, so if you want something to appear after all the NixOS entries, it should start with o or onwards.

Type: attribute set of strings concatenated with “\n”

Default: { }

Example:

{ "memtest86.conf" = ''
  title MemTest86
  efi /efi/memtest86/memtest86.efi
''; }

Declared by:

A set of files to be copied to /boot. Each attribute name denotes the destination file name in /boot, while the corresponding attribute value specifies the source file.

Type: attribute set of path

Default: { }

Example:

{ "efi/memtest86/memtest86.efi" = "${pkgs.memtest86-efi}/BOOTX64.efi"; }

Declared by:

Additional shell commands inserted in the bootloader installer script after generating menu entries. It can be used to expand on extra boot entries that cannot incorporate certain pieces of information (such as the resulting init= kernel parameter).

Type: strings concatenated with “\n”

Default: ""

Example:

''
  default_cfg=$(cat /boot/loader/loader.conf | grep default | awk '{print $2}')
  init_value=$(cat /boot/loader/entries/$default_cfg | grep init= | awk '{print $2}')
  sed -i "s|@INIT@|$init_value|g" /boot/custom/config_with_placeholder.conf
''

Declared by:

Invoke bootctl install with the --graceful option, which ignores errors when EFI variables cannot be written or when the EFI System Partition cannot be found. Currently only applies to random seed operations.

Only enable this option if systemd-boot otherwise fails to install, as the scope or implication of the --graceful option may change in the future.

Type: boolean

Default: false

Declared by:

Make MemTest86 available from the systemd-boot menu. MemTest86 is a program for testing memory. MemTest86 is an unfree program, so this requires allowUnfree to be set to true.

Type: boolean

Default: false

Declared by:

systemd-boot orders the menu entries by the config file names, so if you want something to appear after all the NixOS entries, it should start with o or onwards.

Type: string

Default: "memtest86.conf"

Declared by:

Make netboot.xyz available from the systemd-boot menu. netboot.xyz is a menu system that allows you to boot OS installers and utilities over the network.

Type: boolean

Default: false

Declared by:

systemd-boot orders the menu entries by the config file names, so if you want something to appear after all the NixOS entries, it should start with o or onwards.

Type: string

Default: "o_netbootxyz.conf"

Declared by:

Timeout (in seconds) until loader boots the default menu item. Use null if the loader menu should be displayed indefinitely.

Type: null or signed integer

Default: 5

Declared by:

Whether to enable modprobe config. This is useful for systems like containers which do not require a kernel.

Type: boolean

Default: true

Example: true

Declared by:

Whether to enable Plymouth boot splash screen.

Type: boolean

Default: false

Example: true

Declared by:

Literal string to append to configFile and the config file generated by the plymouth module.

Type: strings concatenated with “\n”

Default: ""

Declared by:

Font file made available for displaying text on the splash screen.

Type: path

Default: "${pkgs.dejavu_fonts.minimal}/share/fonts/truetype/DejaVuSans.ttf"

Declared by:

Logo which is displayed on the splash screen.

Type: path

Default:

pkgs.fetchurl {
          url = "https://nixos.org/logo/nixos-hires.png";
          sha256 = "1ivzgd7iz0i06y36p8m5w48fd8pjqwxhdaavc0pxs7w1g7mcy5si";
        }

Declared by:

Splash screen theme.

Type: string

Default: "bgrt"

Declared by:

Extra theme packages for plymouth.

Type: list of package

Default: A NixOS branded variant of the breeze theme when config.boot.plymouth.theme == "breeze", otherwise [ ].

Declared by:

Shell commands to be executed just before systemd is started.

Type: strings concatenated with “\n”

Default: ""

Example: "rm -f /var/log/messages"

Declared by:

If set, NixOS will enforce the immutability of the Nix store by making /nix/store a read-only bind mount. Nix will automatically make the store writable when needed.

Type: boolean

Default: true

Declared by:

Device for manual resume attempt during boot. This should be used primarily if you want to resume from file. If left empty, the swap partitions are used. Specify here the device where the file resides. You should also use boot.kernelParams to specify «resume_offset».

Type: string

Default: ""

Example: "/dev/sda3"

Declared by:

Size limit for the /run tmpfs. Look at mount(8), tmpfs size option, for the accepted syntax.

Type: string

Default: "25%"

Example: "256m"

Declared by:

List of paths that should be mounted before this one. This filesystem’s device and mountPoint are always checked and do not need to be included explicitly. If a path is added to this list, any other filesystem whose mount point is a parent of the path will be mounted before this filesystem. The paths do not need to actually be the mountPoint of some other filesystem.

Type: list of string (with check: non-empty without trailing slash)

Default: [ ]

Example:

[
  "/persist"
]

Declared by:

Location of the device.

Type: null or string (with check: non-empty)

Default: null

Example: "/dev/sda"

Declared by:

Type of the file system.

Type: string (with check: non-empty)

Default: "auto"

Example: "ext3"

Declared by:

Location of the mounted file system.

Type: string (with check: non-empty without trailing slash)

Example: "/mnt/usb"

Declared by:

Options used to mount the file system.

Type: non-empty (list of string (with check: non-empty))

Default:

[
  "defaults"
]

Example:

[
  "data=journal"
]

Declared by:

Names of supported filesystem types.

Type: list of string

Default: [ ]

Example:

[
  "btrfs"
]

Declared by:

The program to execute to start systemd.

Type: string

Default: "/run/current-system/systemd/lib/systemd/systemd"

Declared by:

Whether to delete all files in /tmp during boot.

Type: boolean

Default: false

Declared by:

Size of tmpfs in percentage. Percentage is defined by systemd.

Type: string or positive integer, meaning >0

Default: "50%"

Declared by:

Whether to mount a tmpfs on /tmp during boot.

Type: boolean

Default: false

Declared by:

Whether to enable uvesafb.

Type: boolean

Default: false

Example: true

Declared by:

Screen resolution in modedb format. See uvesafb and modedb documentation for more details. The default value is a sensible default but may be not ideal for all setups.

Type: string

Default: "1024x768-32"

Declared by:

Which v86d package to use with uvesafb

Type: package

Default:

''
  config.boot.kernelPackages.v86d.overrideAttrs (old: {
            hardeningDisable = [ "all" ];
          })''

Declared by:

(Deprecated) This option, if set, activates the VESA 800x600 video mode on boot and disables kernel modesetting. It is equivalent to specifying [ "vga=0x317" "nomodeset" ] in the boot.kernelParams option. This option is deprecated as of 2020: Xorg now works better with modesetting, and you might want a different VESA vga setting, anyway.

Type: boolean

Default: false

Declared by:

Use the unstable zfs package. This might be an option, if the latest kernel is not yet supported by a published release of ZFS. Enabling this option will install a development version of ZFS on Linux. The version will have already passed an extensive test suite, but it is more likely to hit an undiscovered bug compared to running a released version of ZFS on Linux.

Type: boolean

Default: false

Declared by:

True if ZFS filesystem support is enabled

Type: boolean (read only)

Default: true if ZFS filesystem support is enabled

Declared by:

Configured ZFS userland tools package.

Type: package (read only)

Default: if config.boot.zfs.enableUnstable then pkgs.zfsUnstable else pkgs.zfs

Declared by:

Allow hibernation support, this may be a unsafe option depending on your setup. Make sure to NOT use Swap on ZFS.

Type: boolean

Default: false

Declared by:

Name of directory from which to import ZFS devices.

This should be a path under /dev containing stable names for all devices needed, as import may fail if device nodes are renamed concurrently with a device failing.

Type: path

Default: "/dev/disk/by-id"

Declared by:

Name or GUID of extra ZFS pools that you wish to import during boot.

Usually this is not necessary. Instead, you should set the mountpoint property of ZFS filesystems to legacy and add the ZFS filesystems to NixOS’s fileSystems option, which makes NixOS automatically import the associated pool.

However, in some cases (e.g. if you have many filesystems) it may be preferable to exclusively use ZFS commands to manage filesystems. If so, since NixOS/systemd will not be managing those filesystems, you will need to specify the ZFS pool here so that NixOS automatically imports it on every boot.

Type: list of string

Default: [ ]

Example:

[
  "tank"
  "data"
]

Declared by:

Forcibly import all ZFS pool(s).

If you set this option to false and NixOS subsequently fails to import your non-root ZFS pool(s), you should manually import each pool with “zpool import -f <pool-name>”, and then reboot. You should only need to do this once.

Type: boolean

Default: false

Declared by:

Forcibly import the ZFS root pool(s) during early boot.

This is enabled by default for backwards compatibility purposes, but it is highly recommended to disable this option, as it bypasses some of the safeguards ZFS uses to protect your ZFS pools.

If you set this option to false and NixOS subsequently fails to boot because it cannot import the root pool, you should boot with the zfs_force=1 option as a kernel parameter (e.g. by manually editing the kernel params in grub during boot). You should only need to do this once.

Type: boolean

Default: true

Declared by:

Timeout in seconds to wait for password entry for decrypt at boot.

Defaults to 0, which waits forever.

Type: signed integer

Default: 0

Declared by:

Linux 6.2 dropped some kernel symbols required on aarch64 required by zfs. Enabling this option will bring them back to allow this kernel version. Note that in some jurisdictions this may be illegal as it might be considered removing copyright protection from the code. See https://www.ifross.org/?q=en/artikel/ongoing-dispute-over-value-exportsymbolgpl-function for further information.

Type: boolean

Default: false

Declared by:

If true on import encryption keys or passwords for all encrypted datasets are requested. To only decrypt selected datasets supply a list of dataset names instead. For root pools the encryption key can be supplied via both an interactive prompt (keylocation=prompt) and from a file (keylocation=file://).

Type: boolean or list of string

Default: true

Example:

[
  "tank"
  "data"
]

Declared by:

Whether to enable virtual console.

Type: boolean

Default: true

Example: true

Declared by:

List of additional packages that provide console fonts, keymaps and other resources for virtual consoles use.

Type: list of package

Default: [ ]

Declared by:

The 16 colors palette used by the virtual consoles. Leave empty to use the default colors. Colors must be in hexadecimal format and listed in order from color 0 to color 15.

Type: list of string matching the pattern [[:xdigit:]]{6}

Default: [ ]

Example:

[
  "002b36"
  "dc322f"
  "859900"
  "b58900"
  "268bd2"
  "d33682"
  "2aa198"
  "eee8d5"
  "002b36"
  "cb4b16"
  "586e75"
  "657b83"
  "839496"
  "6c71c4"
  "93a1a1"
  "fdf6e3"
]

Declared by:

Enable setting virtual console options as early as possible (in initrd).

Type: boolean

Default: false

Declared by:

The font used for the virtual consoles. Can be null, a font name, or a path to a PSF font file.

Use null to let the kernel choose a built-in font. The default is 8x16, and, as of Linux 5.3, Terminus 32 bold for display resolutions of 2560x1080 and higher. These fonts cover the IBM437 character set.

Type: null or string or path

Default: null

Example: "LatArCyrHeb-16"

Declared by:

The keyboard mapping table for the virtual consoles.

Type: string or path

Default: "us"

Example: "fr"

Declared by:

If set, configure the virtual console keymap from the xserver keyboard settings.

Type: boolean

Default: false

Declared by:

A set of NixOS system configurations to be run as lightweight containers. Each container appears as a service container-«name» on the host system, allowing it to be started and stopped via systemctl.

Type: attribute set of (submodule)

Default: { }

Example:

{ webserver =
    { path = "/nix/var/nix/profiles/webserver";
    };
  database =
    { config =
        { config, pkgs, ... }:
        { services.postgresql.enable = true;
          services.postgresql.package = pkgs.postgresql_14;

          system.stateVersion = "21.05";
        };
    };
}

Declared by:

Allows the container to create and setup tunnel interfaces by granting the NET_ADMIN capability and enabling access to /dev/net/tun.

Type: boolean

Default: false

Declared by:

Grant additional capabilities to the container. See the capabilities(7) and systemd-nspawn(1) man pages for more information.

Type: list of string

Default: [ ]

Example:

[
  "CAP_NET_ADMIN"
  "CAP_MKNOD"
]

Declared by:

A list of device nodes to which the containers has access to.

Type: list of (submodule)

Default: [ ]

Example:

[
  {
    modifier = "rw";
    node = "/dev/net/tun";
  }
]

Declared by:

Device node access modifier. Takes a combination r (read), w (write), and m (mknod). See the systemd.resource-control(5) man page for more information.

Type: string

Example: "rw"

Declared by:

Path to device node

Type: string

Example: "/dev/net/tun"

Declared by:

Whether the container is automatically started at boot-time.

Type: boolean

Default: false

Declared by:

An extra list of directories that is bound to the container.

Type: attribute set of (submodule)

Default: { }

Example:

{ "/home" = { hostPath = "/home/alice";
              isReadOnly = false; };
}

Declared by:

Location of the host path to be mounted.

Type: null or string

Default: null

Example: "/home/alice"

Declared by:

Determine whether the mounted path will be accessed in read-only mode.

Type: boolean

Default: true

Declared by:

Mount point on the container file system.

Type: string

Example: "/mnt/usb"

Declared by:

A specification of the desired configuration of this container, as a NixOS module.

Type: Toplevel NixOS config

Declared by:

Runs container in ephemeral mode with the empty root filesystem at boot. This way container will be bootstrapped from scratch on each boot and will be cleaned up on shutdown leaving no traces behind. Useful for completely stateless, reproducible containers.

Note that this option might require to do some adjustments to the container configuration, e.g. you might want to set systemd.network.networks.$interface.dhcpV4Config.ClientIdentifier to “mac” if you use macvlans option. This way dhcp client identifier will be stable between the container restarts.

Note that the container journal will not be linked to the host if this option is enabled.

Type: boolean

Default: false

Declared by:

Extra flags passed to the systemd-nspawn command. See systemd-nspawn(1) for details.

Type: list of string

Default: [ ]

Example:

[
  "--drop-capability=CAP_SYS_CHROOT"
]

Declared by:

Extra veth-pairs to be created for the container.

Type: attribute set of (submodule)

Default: { }

Declared by:

List of forwarded ports from host to container. Each forwarded port is specified by protocol, hostPort and containerPort. By default, protocol is tcp and hostPort and containerPort are assumed to be the same if containerPort is not explicitly given.

Type: list of (submodule)

Default: [ ]

Example:

[
  {
    containerPort = 80;
    hostPort = 8080;
    protocol = "tcp";
  }
]

Declared by:

Target port of container

Type: null or signed integer

Default: null

Declared by:

Source port of the external interface on host

Type: signed integer

Declared by:

The protocol specifier for port forwarding between host and container

Type: string

Default: "tcp"

Declared by:

The IPv4 address assigned to the host interface. (Not used when hostBridge is set.)

Type: null or string

Default: null

Example: "10.231.136.1"

Declared by:

The IPv6 address assigned to the host interface. (Not used when hostBridge is set.)

Type: null or string

Default: null

Example: "fc00::1"

Declared by:

Put the host-side of the veth-pair into the named bridge. Only one of hostAddress* or hostBridge can be given.

Type: null or string

Default: null

Example: "br0"

Declared by:

The IPv4 address assigned to the interface in the container. If a hostBridge is used, this should be given with netmask to access the whole network. Otherwise the default netmask is /32 and routing is set up from localAddress to hostAddress and back.

Type: null or string

Default: null

Example: "10.231.136.2"

Declared by:

The IPv6 address assigned to the interface in the container. If a hostBridge is used, this should be given with netmask to access the whole network. Otherwise the default netmask is /128 and routing is set up from localAddress6 to hostAddress6 and back.

Type: null or string

Default: null

Example: "fc00::2"

Declared by:

List of forwarded ports from host to container. Each forwarded port is specified by protocol, hostPort and containerPort. By default, protocol is tcp and hostPort and containerPort are assumed to be the same if containerPort is not explicitly given.

Type: list of (submodule)

Default: [ ]

Example:

[
  {
    containerPort = 80;
    hostPort = 8080;
    protocol = "tcp";
  }
]

Declared by:

Target port of container

Type: null or signed integer

Default: null

Declared by:

Source port of the external interface on host

Type: signed integer

Declared by:

The protocol specifier for port forwarding between host and container

Type: string

Default: "tcp"

Declared by:

The IPv4 address assigned to the host interface. (Not used when hostBridge is set.)

Type: null or string

Default: null

Example: "10.231.136.1"

Declared by:

The IPv6 address assigned to the host interface. (Not used when hostBridge is set.)

Type: null or string

Default: null

Example: "fc00::1"

Declared by:

Put the host-side of the veth-pair into the named bridge. Only one of hostAddress* or hostBridge can be given.

Type: null or string

Default: null

Example: "br0"

Declared by:

The list of interfaces to be moved into the container.

Type: list of string

Default: [ ]

Example:

[
  "eth1"
  "eth2"
]

Declared by:

The IPv4 address assigned to the interface in the container. If a hostBridge is used, this should be given with netmask to access the whole network. Otherwise the default netmask is /32 and routing is set up from localAddress to hostAddress and back.

Type: null or string

Default: null

Example: "10.231.136.2"

Declared by:

The IPv6 address assigned to the interface in the container. If a hostBridge is used, this should be given with netmask to access the whole network. Otherwise the default netmask is /128 and routing is set up from localAddress6 to hostAddress6 and back.

Type: null or string

Default: null

Example: "fc00::2"

Declared by:

The list of host interfaces from which macvlans will be created. For each interface specified, a macvlan interface will be created and moved to the container.

Type: list of string

Default: [ ]

Example:

[
  "eth1"
  "eth2"
]

Declared by:

A path to the nixpkgs that provide the modules, pkgs and lib for evaluating the container.

To only change the pkgs argument used inside the container modules, set the nixpkgs.* options in the container config. Setting config.nixpkgs.pkgs = pkgs speeds up the container evaluation by reusing the system pkgs, but the nixpkgs.config option in the container config is ignored in this case.

Type: path

Default: pkgs.path

Declared by:

As an alternative to specifying config, you can specify the path to the evaluated NixOS system configuration, typically a symlink to a system profile.

Type: path

Example: "/nix/var/nix/profiles/per-container/webserver"

Declared by:

Whether to give the container its own private virtual Ethernet interface. The interface is called eth0, and is hooked up to the interface ve-«container-name» on the host. If this option is not set, then the container shares the network interfaces of the host, and can bind to any port on any interface.

Type: boolean

Default: false

Declared by:

A set of special arguments to be passed to NixOS modules. This will be merged into the specialArgs used to evaluate the NixOS configurations.

Type: attribute set of unspecified value

Default: { }